Col de Bedos from Félines-Termenès
Col de Bedos from Félines-Termenès: 3.8 km at 4.3% average and 166 m of climbing, up to 485 m.
- Distance
- 3.8 km
- Elevation gain
- 166 m
- Average gradient
- 4.3 %
- Start altitude
- 326 m
- Road
- Departmental road
- Surface
- Paved throughout
- Steepest 500 m
- 6.1 %
- Hardest 2 km
- 5.2 %
- Hardest kilometre
- km 3 · 5.1%
- Above 8%
- 0.2 km (5% of the climb)
- Difficulty index
- 0.7 Easy
FIETS index: Δaltitude² / (10 × distance) + max(0, summit altitude − 1,000) / 1,000, lengths in metres. How this index works (article in French)
How long does it take?
| Level | Estimated time | Average speed |
|---|---|---|
| 2.0 W/kg — 140 W | 19 min | 12.3 km/h |
| 3.0 W/kg — 210 W | 13 min | 17.3 km/h |
| 4.0 W/kg — 280 W | 11 min | 21.5 km/h |
Estimated for a 70 kg rider on a 9 kg bike, in still air, at a steady effort and without stopping. Wind, a stop at the fountain or a wheel to sit on move these figures by several minutes.
The route
Climb profile
- 10% and above
- 8 to 10%
- 6 to 8%
- 4 to 6%
- under 4%
Kilometre by kilometre
| Km | Gradient | Altitude at the top of the km |
|---|---|---|
| 1 | 3.7 % | 363 m |
| 2 | 5.0 % | 413 m |
| 3 | 5.1 % | 464 m |
| 4 (partial) | 3.4 % | 492 m |
Download the GPX track All climbs of this col
Frequently asked questions
How long is the climb to Col de Bedos?
The hardest climb of Col de Bedos, from Félines-Termenès, is 3.8 km long for 166 m of ascent, i.e. 4.3% average.
What is the steepest part of Col de Bedos?
The steepest 500 m sits at 6.1%, and the hardest kilometre is the 3th, at 5.1%.
How long does it take to climb Col de Bedos from Félines-Termenès?
Col de Bedos from Félines-Termenès takes about 13 min at 3.0 W/kg, i.e. 17.3 km/h on average. The page gives three levels and their assumptions.
Col de Bedos: add this col to your collection
Sleipnir recognises the cols you cross from the GPS trace of your rides: the col ticks itself off the day you ride over it.
Create an accountFree during the beta, no card required — places are limited.
A Polar watch syncs on its own; with any other watch, import your GPX or TCX files.